top of page
EXMICRO2i 

HDMI extender that supports 4K/UHD/1080p up to 50m/164ft. on Cat6/6A, with EDID and 2-Way 12V IR that is control system compatible

​

The EXMICRO2i is the latest in the Simplified MFG Micro line.  It extends either 4K/UHD or 1080p HDMI signals up to 50m/164ft.  The EXMICRO2i supports the entire HDMI 2.0b format including HDR and HDR+.  The extender kit only requires power from one end (either) and has a 2-Way 12V IR kit included (one TX and one RX).  There is also an innovative EDID circuit that allows for two preset EDID's (4K 60Hz. Stereo and 1080p 60Hz. Stereo.  The other two settings allow for copy of the connected display at the RX or at the TX.  In addition, this technology is more efficient than most only drawing about 1/3 the power (3.84W) of a typical extender set similar to its abilities.  Small, efficient, effective.

EMICRO2i QS
Angle Top
EDID EXM2i
Angle 2 Transparent
TX Angle1
TX Switch Side
TX HDMI End Transparent
TX cat End Transparent
RX Side Transparent
RX HDMI End Transparent
RX cat End Transparent
Screenshot 2021-02-15 180920

Features & Benefits:

​​

  • Allows HDMI 2.0b (18Gbps) Audio/Video and 2-Way IR signals (to and from display) to be transmitted over a single Cat6/5e cable

  • Built in EQ technology to eliminate
    clocking issues

  • EDID Management (copy from display at RX, copy from display at TX, 1080p 60Hz. Stereo, 4K 60Hz. Stereo) 

  • Transmission Range: 

    • 4K@60Hz up to 50m/164ft over Cat6 cable.

    • 1080P@60Hz up to 50m/164ft over Cat6 cable.

  • HDCP1.4 and HDCP2.2 compliant

  • Power from RX or TX

  • Compact design

  • 3-Year Warranty

Specifications:​​

Specifications subject to change.

Additional Extenders:

​​

bottom of page